3" Pro Series Additional Resources
What is the NDS 3" Pro Series?
The 3" NDS Pro Series of trench drains is a polypropylene-based drainage system. While other drainage systems, much like the 5" Pro Series can be easily adapted to any hardscape due to radius couplings, corners, tees, and crosses, the 3" Pro Series is only available in straight runs. 3” Pro series channel drains can be cut to sizes as small as 4". 3" Pro Series from NDS is the ideal trench drain to displace large amounts of water -- the channel drain itself will hold about the same volume of water as a 4” diameter pipe. With the ability to withstand and support automobiles, light trucks, and medium-duty pneumatic tires (up to 175 psi) at speeds less than 20 m.p.h. , The NDS 3" Pro Series is perfect for almost any hardscape imaginable.
Applications for 3" Pro Series Drains
Recommended applications of the NDS 3" Pro Series Drain System include:
- Athletic Fields
- Driveways
- Spas
- Tennis Courts
- Pools
- Residential Hardscapes
NDS 3" Pro Series Features
- Only available in straight runs -- No Prefabricated Angles or varied colored channel grates
- Modular design available in 1 meter lengths capable of being cut to sections as short as 4"
- Equipped with UV Inhibitors to prevent fading and cracking
- Unique interlocking joints remove the need for couplings
Frequently Asked Questions
Where can I purchase NDS 3" Pro Series Channel Drain and accessories?
We're a little biased, but we believe there's no better place to buy NDS products than here at Drainage Connect. You can browse our selection of NDS 3" Pro Series equipment here.
What lengths are available?
NDS 3" Pro Series channel is available in 1 meter drains . The channel can be cut at lengths as short as 4" while still preserving the built-in joints, which act as couplings.
What colors grates are available?
3" Pro Series drain grates are available are only in grey.
Are metal grates available?
Since the 3” Pro Series system is not meant for heavy traffic, metal grates are not available. If your project requires metal grates, please consider the Spee-D Channel Drain System, the Mini Channel Drain System, or Pro Series Channel Drain System
What is the load rating of NDS 3" Pro Series Channel Drains?
The 3” Pro Series grates from NDS is capable of supporting automobiles, light trucks, and medium-duty pneumatic tires (up to 175 psi) at speeds less than 20 m.p.h.
Does the 3" Pro Series Channel ship with any attachments?
If only the channel is purchased, there are no parts or accessories included. A kit is available for the 3" Pro Series which includes 1 meter of channel drain, two grates, eight screws, an end cap, and a spigot end outlet.
Can the 3" Pro Series make bends?
Yes! Although there are no prefabricated accessories for the 3” Pro Series Channel to make bends, the channel can be cut to any angle using a miter saw. The same angle will need to be cut into another piece of channel. Glue the pieces together and secure the joint before encasing in concrete.
How do I connect the channels together?
Pro series channels connect via the built-in interlocking joints at the end of each channel. These joints are also available in 4" segments should you need to cut the channel to size.
How does the water drain out of the 3” Pro Series Drains?
There are two options to drain the water out of the 3” Pro Series Channel; the end of the channel or the bottom of the channel by using the knockout outlet included. Each outlet connects to a 3” sewer and drain pipe.
Do I need to worry about expansion and contraction of the grates?
NDS recommends that 1/8" be left in between each grate to allow for any expansion or contraction that may occur.
How much water can the channel hold?
The channel itself will hold about the same volume of water as a 4” diameter pipe.
How do I glue on the accessories?
The 3” Pro Series Channel is made from PVC. PVC glue can be used to glue all pieces together.
How are the grates connected to the channel?
The grates themselves fit within the Pro Series channel and are secured by 4 screws per grate. Screws may be purchased here (Stainless Steel Screws, Phillips Head #8 x 1” screws).